After hardware replacement on the server , server came up with the network issue (default gateway is not reachable)
On checking it was found that primary lan cable is connected loosely. HP engineer was asked to re-plugg the cable .
After that server came into the Network
[root@mickey:/etc/rc.config.d]#
#-> lanscan 3
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/0/0/1/0 0x00180E28230B 0 UP lan0 snap0 1 ETHER Yes 119
0/0/6/1/0/6/0 0x0010353E02C2 3 UP lan3 snap3 2 ETHER Yes 119
0/0/14/1/0/6/0 0x0014029CF72F 4 UP lan4 snap4 3 ETHER Yes 119
0/0/4/1/0 0x0017A4510D9E 1 UP lan1 snap1 4 ETHER Yes 119
0/0/4/1/1 0x0017A4510D9F 2 UP lan2 snap2 5 ETHER Yes 119
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 3
Speed = 1000 Full-Duplex.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 0
The link is down. The speed and other link state information
are undefined. The configuration specified for this card is:
Speed = 1000 or 100 or 10 Mbps.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 3
Speed = 1000 Full-Duplex.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 4
The link is down. The speed and other link state information
are undefined. The configuration specified for this card is:
Speed = 1000 or 100 or 10 Mbps.
Autonegotiation = On.
On checking it was found that primary lan cable is connected loosely. HP engineer was asked to re-plugg the cable .
After that server came into the Network
[root@mickey:/etc/rc.config.d]#
#-> lanscan 3
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/0/0/1/0 0x00180E28230B 0 UP lan0 snap0 1 ETHER Yes 119
0/0/6/1/0/6/0 0x0010353E02C2 3 UP lan3 snap3 2 ETHER Yes 119
0/0/14/1/0/6/0 0x0014029CF72F 4 UP lan4 snap4 3 ETHER Yes 119
0/0/4/1/0 0x0017A4510D9E 1 UP lan1 snap1 4 ETHER Yes 119
0/0/4/1/1 0x0017A4510D9F 2 UP lan2 snap2 5 ETHER Yes 119
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 3
Speed = 1000 Full-Duplex.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 0
The link is down. The speed and other link state information
are undefined. The configuration specified for this card is:
Speed = 1000 or 100 or 10 Mbps.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 3
Speed = 1000 Full-Duplex.
Autonegotiation = On.
[root@mickey:/etc/rc.config.d]#
#-> lanadmin -x 4
The link is down. The speed and other link state information
are undefined. The configuration specified for this card is:
Speed = 1000 or 100 or 10 Mbps.
Autonegotiation = On.
No comments:
Post a Comment