Boot Sequence:
1,0,0,0 3400008101E10000 000000000007000C EVN_IO_DISCOVERY_START
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
1,0,0,0 5400020B01E10000 0000000000000006 EVN_EFI_LAUNCH_BOOT_MANAGER
(C) Copyright 1996-2010 Hewlett-Packard Development Company, L.P.
Note, menu interfaces might only display on the primary console device.
The current primary console device is:
Serial PcieRoot(0x30304352)/Pci(0x1,0x0)/Pci(0x0,0x5)
The primary console can be changed via the 'conconfig' UEFI shell command.
Press: ENTER - Start boot entry execution
B / b - Launch Boot Manager (menu interface)
D / d - Launch Device Manager (menu interface)
M / m - Launch Boot Maintenance Manager (menu interface)
S / s - Launch UEFI Shell (command line interface)
I / i - Launch iLO Setup Tool (command line interface)
*** User input can now be provided ***
Automatic boot entry execution will start in 1 second(s).
HP Smart Array P410i Controller (version 6.22)
Currently the controller is in HBA mode
Booting HP-UX Primary Boot: 0/0/0/2/0/0/0.0x0.0x1010000c0000000
(C) Copyright 1999-2012 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.047
Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix -lq
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 130970 MB
loading section 0
................................................................................ (complete)
loading section 1
..................... (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.........................................
================================================================================
WARNING: Multiple console output devices are configured. If this message
remains on the screen for more than a few minutes, then this is not the
device in use by HP-UX as the console output device. If you would like this
device to be the one used by HP-UX as the console output device, reboot and
use the EFI boot manager or the EFI 'conconfig' command to select this device
and deconfigure the others.
================================================================================
Launching /stand/vmunix
SIZE: Text:40562K + Data:10454K + BSS:29169K = Total:80186K
Console is on Serial Device - via PCDP
Booting kernel...
Loaded ACPI revision 2.0 tables.
acdd_tuning: Configuring acdd tunable paramters
Using /stand/ext_ioconfig
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 124572 MB 124572 MB 124572 MB
Kernel : 124572 MB 124572 MB 124572 MB
User : 119872 MB 106269 MB 106686 MB
-------------------------------------------------------------------------
ktracer is off until requested.
spinlock ALAT switching supported on this system
acdd_install: Setting up
acdd_install: Claiming all IBM changers
Installing Socket Protocol families AF_INET and AF_INET6
Lowfat driver is the master here
Kernel EVM initialized
Installed MemFS
Registered RDS/ib transport
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
atdd_c_tuning: Starting configuration
atdd_c_install: Call wsio_install_driver
atdd_c_install: Done
atdd_c_load: Entry
atdd_c_load: drv_info name: atdd_core:atdd_core
atdd_c_load: drv_info cmaj: 9E:9E
atdd_setup_c_callbacks: main driver has just loaded, switching to its interfaces
acdd_setup_c_callbacks: Main driver has just loaded, switching to its interfaces
atdd_c_load: Done
CISS: RAID SA P410i controller on hardware path 0/0/0/2/0/0/0 is now online.
Boot device's HP-UX HW path is: 0/0/0/2/0/0/0.0x0.0x1010000c0000000
System Console is on the Built-In Serial Interface
iexgbe0: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/0
iexgbe1: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/1
iexgbe2: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/2
iexgbe3: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/3
iexgbe4: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/4
iexgbe5: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/5
iexgbe6: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/6
iexgbe7: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/7
iexgbe8: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/0
iexgbe9: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/1
iexgbe10: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/2
iexgbe11: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/3
iexgbe12: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/4
iexgbe13: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/5
iexgbe14: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/6
iexgbe15: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/7
AF_INET socket/streams output daemon running, pid 66
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 134217728
Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 134113680 Kbytes, lockable: 101361384 Kbytes, available: 115293668 Kbytes
/sbin/ioinitrc:
/dev/vg00/lvol1:log replay in progress
/dev/vg00/lvol1:replay complete - marking super-block as CLEAN
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
* The module 'pciinfo' has been loaded.
* The module 'gvid_info' has been loaded.
insf: Installing special files for ipmi instance 0 address 0/250/1
insf: Installing special files for pseudo driver framebuf
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Activated volume group.
Volume group "/dev/vg_ora" has been successfully changed.
Activated volume group.
Volume group "/dev/vg_openv" has been successfully changed.
Checking vxfs file systems
UX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol9:sanity check: /dev/vg00/lvol9 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol10:sanity check: /dev/vg00/lvol10 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvopenv:sanity check: /dev/vg_openv/lvopenv needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvpatches:sanity check: /dev/vg_openv/lvpatches needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvlogs:sanity check: /dev/vg_openv/lvlogs needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvnetbkplogs:sanity check: /dev/vg_openv/lvnetbkplogs needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lv__APPQcime:sanity check: /dev/vg_openv/lv__APPQcime needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvora:sanity check: /dev/vg_ora/lvora needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvorastage:sanity check: /dev/vg_ora/lvorastage needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvusrsap:sanity check: /dev/vg_ora/lvusrsap needs checking
/dev/vg00/lvol4:log replay in progress
/dev/vg00/lvol4:replay complete - marking super-block as CLEAN
/dev/vg00/lvol5:log replay in progress
/dev/vg00/lvol5:replay complete - marking super-block as CLEAN
/dev/vg00/lvol6:log replay in progress
/dev/vg00/lvol6:replay complete - marking super-block as CLEAN
/dev/vg00/lvol7:log replay in progress
/dev/vg00/lvol7:replay complete - marking super-block as CLEAN
/dev/vg00/lvol9:log replay in progress
/dev/vg00/lvol9:replay complete - marking super-block as CLEAN
/dev/vg00/lvol10:log replay in progress
/dev/vg00/lvol10:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvopenv:log replay in progress
/dev/vg_openv/lvopenv:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvpatches:log replay in progress
/dev/vg_openv/lvpatches:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvlogs:log replay in progress
/dev/vg_openv/lvlogs:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvnetbkplogs:log replay in progress
/dev/vg_openv/lvnetbkplogs:replay complete - marking super-block as CLEAN
/dev/vg_openv/lv__APPQcime:log replay in progress
/dev/vg_openv/lv__APPQcime:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvora:log replay in progress
/dev/vg_ora/lvora:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvorastage:log replay in progress
/dev/vg_ora/lvorastage:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvusrsap:log replay in progress
/dev/vg_ora/lvusrsap:replay complete - marking super-block as CLEAN
Cleaning /etc/ptmp...
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
Confidential computer software. Valid license from HP required for
possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.
/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)
HP-UX Start-up in progress
__________________________
Avc init level entry .............................................. OK
Configure system crash dumps ...................................... OK
Start Integrity VM Guest Tools .................................... OK
Removing old vxvm files ........................................... OK
Mount file systems ................................................ OK
Remounting Root File System ....................................... OK
Setting hostname .................................................. OK
Start containment subsystem configuration ......................... OK
Set privilege group ............................................... N/A
Display date ...................................................... N/A
Save system crash dump if needed ..................................
1,0,0,0 3400008101E10000 000000000007000C EVN_IO_DISCOVERY_START
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
Dual Port Flex10 10GbE BL8XXc i2 Embedded CNIC is detected
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
HP PCIe 2Port 8Gb Fibre Channel Adapter (driver 2.22, firmware 5.03.015)
1,0,0,0 5400020B01E10000 0000000000000006 EVN_EFI_LAUNCH_BOOT_MANAGER
(C) Copyright 1996-2010 Hewlett-Packard Development Company, L.P.
Note, menu interfaces might only display on the primary console device.
The current primary console device is:
Serial PcieRoot(0x30304352)/Pci(0x1,0x0)/Pci(0x0,0x5)
The primary console can be changed via the 'conconfig' UEFI shell command.
Press: ENTER - Start boot entry execution
B / b - Launch Boot Manager (menu interface)
D / d - Launch Device Manager (menu interface)
M / m - Launch Boot Maintenance Manager (menu interface)
S / s - Launch UEFI Shell (command line interface)
I / i - Launch iLO Setup Tool (command line interface)
*** User input can now be provided ***
Automatic boot entry execution will start in 1 second(s).
HP Smart Array P410i Controller (version 6.22)
Currently the controller is in HBA mode
Booting HP-UX Primary Boot: 0/0/0/2/0/0/0.0x0.0x1010000c0000000
(C) Copyright 1999-2012 Hewlett-Packard Development Company, L.P.
All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.047
Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix -lq
Seconds left till autoboot - 0
AUTOBOOTING...> System Memory = 130970 MB
loading section 0
................................................................................ (complete)
loading section 1
..................... (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
.....
loading MFSFILES directory (bootfs) to MFS
.........................................
================================================================================
WARNING: Multiple console output devices are configured. If this message
remains on the screen for more than a few minutes, then this is not the
device in use by HP-UX as the console output device. If you would like this
device to be the one used by HP-UX as the console output device, reboot and
use the EFI boot manager or the EFI 'conconfig' command to select this device
and deconfigure the others.
================================================================================
Launching /stand/vmunix
SIZE: Text:40562K + Data:10454K + BSS:29169K = Total:80186K
Console is on Serial Device - via PCDP
Booting kernel...
Loaded ACPI revision 2.0 tables.
acdd_tuning: Configuring acdd tunable paramters
Using /stand/ext_ioconfig
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 124572 MB 124572 MB 124572 MB
Kernel : 124572 MB 124572 MB 124572 MB
User : 119872 MB 106269 MB 106686 MB
-------------------------------------------------------------------------
ktracer is off until requested.
spinlock ALAT switching supported on this system
acdd_install: Setting up
acdd_install: Claiming all IBM changers
Installing Socket Protocol families AF_INET and AF_INET6
Lowfat driver is the master here
Kernel EVM initialized
Installed MemFS
Registered RDS/ib transport
sec_init(): kernel RPC authentication/security initialization.
secgss_init(): kernel RPCSEC_GSS security initialization.
rpc_init(): kernel RPC initialization.
rpcmod_install(): kernel RPC STREAMS module "rpcmod" installation. ...(driver_install)
NOTICE: nfs_client_pv3_install(): nfs3 File system was registered at index 11.
NOTICE: nfs_client_pv4_install(): nfs4 File system was registered at index 12.
NOTICE: cachefsc_install: cachefs File system was registered at index 14.
atdd_c_tuning: Starting configuration
atdd_c_install: Call wsio_install_driver
atdd_c_install: Done
atdd_c_load: Entry
atdd_c_load: drv_info name: atdd_core:atdd_core
atdd_c_load: drv_info cmaj: 9E:9E
atdd_setup_c_callbacks: main driver has just loaded, switching to its interfaces
acdd_setup_c_callbacks: Main driver has just loaded, switching to its interfaces
atdd_c_load: Done
CISS: RAID SA P410i controller on hardware path 0/0/0/2/0/0/0 is now online.
Boot device's HP-UX HW path is: 0/0/0/2/0/0/0.0x0.0x1010000c0000000
System Console is on the Built-In Serial Interface
iexgbe0: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/0
iexgbe1: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/1
iexgbe2: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/2
iexgbe3: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/3
iexgbe4: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/4
iexgbe5: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/5
iexgbe6: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/6
iexgbe7: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/3/0/0/7
iexgbe8: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/0
iexgbe9: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/1
iexgbe10: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/2
iexgbe11: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/3
iexgbe12: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/4
iexgbe13: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/5
iexgbe14: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/6
iexgbe15: INITIALIZING HP PCIe 2-p 10GbE Built-in FLEX-10 at hardware path 0/0/0/4/0/0/7
AF_INET socket/streams output daemon running, pid 66
afinet_prelink: module installed
Starting the STREAMS daemons-phase 1
LVM: Root VG activated
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 134217728
Checking root file system.
log replay in progress
replay complete - marking super-block as CLEAN
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B.11.31_LR FLAVOR=perf
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 134113680 Kbytes, lockable: 101361384 Kbytes, available: 115293668 Kbytes
/sbin/ioinitrc:
/dev/vg00/lvol1:log replay in progress
/dev/vg00/lvol1:replay complete - marking super-block as CLEAN
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
* The module 'pciinfo' has been loaded.
* The module 'gvid_info' has been loaded.
insf: Installing special files for ipmi instance 0 address 0/250/1
insf: Installing special files for pseudo driver framebuf
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Activated volume group.
Volume group "/dev/vg_ora" has been successfully changed.
Activated volume group.
Volume group "/dev/vg_openv" has been successfully changed.
Checking vxfs file systems
UX:vxfs fsck: INFO: V-3-20913: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol9:sanity check: /dev/vg00/lvol9 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg00/lvol10:sanity check: /dev/vg00/lvol10 needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvopenv:sanity check: /dev/vg_openv/lvopenv needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvpatches:sanity check: /dev/vg_openv/lvpatches needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvlogs:sanity check: /dev/vg_openv/lvlogs needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lvnetbkplogs:sanity check: /dev/vg_openv/lvnetbkplogs needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_openv/lv__APPQcime:sanity check: /dev/vg_openv/lv__APPQcime needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvora:sanity check: /dev/vg_ora/lvora needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvorastage:sanity check: /dev/vg_ora/lvorastage needs checking
UX:vxfs fsck: WARNING: V-3-20916: /dev/vg_ora/lvusrsap:sanity check: /dev/vg_ora/lvusrsap needs checking
/dev/vg00/lvol4:log replay in progress
/dev/vg00/lvol4:replay complete - marking super-block as CLEAN
/dev/vg00/lvol5:log replay in progress
/dev/vg00/lvol5:replay complete - marking super-block as CLEAN
/dev/vg00/lvol6:log replay in progress
/dev/vg00/lvol6:replay complete - marking super-block as CLEAN
/dev/vg00/lvol7:log replay in progress
/dev/vg00/lvol7:replay complete - marking super-block as CLEAN
/dev/vg00/lvol9:log replay in progress
/dev/vg00/lvol9:replay complete - marking super-block as CLEAN
/dev/vg00/lvol10:log replay in progress
/dev/vg00/lvol10:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvopenv:log replay in progress
/dev/vg_openv/lvopenv:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvpatches:log replay in progress
/dev/vg_openv/lvpatches:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvlogs:log replay in progress
/dev/vg_openv/lvlogs:replay complete - marking super-block as CLEAN
/dev/vg_openv/lvnetbkplogs:log replay in progress
/dev/vg_openv/lvnetbkplogs:replay complete - marking super-block as CLEAN
/dev/vg_openv/lv__APPQcime:log replay in progress
/dev/vg_openv/lv__APPQcime:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvora:log replay in progress
/dev/vg_ora/lvora:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvorastage:log replay in progress
/dev/vg_ora/lvorastage:replay complete - marking super-block as CLEAN
/dev/vg_ora/lvusrsap:log replay in progress
/dev/vg_ora/lvusrsap:replay complete - marking super-block as CLEAN
Cleaning /etc/ptmp...
(c)Copyright 1983-2006 Hewlett-Packard Development Company, L.P.
(c)Copyright 1979, 1980, 1983, 1985-1993 The Regents of the Univ. of California
(c)Copyright 1980, 1984, 1986 Novell, Inc.
(c)Copyright 1986-2000 Sun Microsystems, Inc.
(c)Copyright 1985, 1986, 1988 Massachusetts Institute of Technology
(c)Copyright 1989-1993 The Open Software Foundation, Inc.
(c)Copyright 1990 Motorola, Inc.
(c)Copyright 1990, 1991, 1992 Cornell University
(c)Copyright 1989-1991 The University of Maryland
(c)Copyright 1988 Carnegie Mellon University
(c)Copyright 1991-2006 Mentat Inc.
(c)Copyright 1996 Morning Star Technologies, Inc.
(c)Copyright 1996 Progressive Systems, Inc.
Confidential computer software. Valid license from HP required for
possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor's standard commercial license.
/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)
HP-UX Start-up in progress
__________________________
Avc init level entry .............................................. OK
Configure system crash dumps ...................................... OK
Start Integrity VM Guest Tools .................................... OK
Removing old vxvm files ........................................... OK
Mount file systems ................................................ OK
Remounting Root File System ....................................... OK
Setting hostname .................................................. OK
Start containment subsystem configuration ......................... OK
Set privilege group ............................................... N/A
Display date ...................................................... N/A
Save system crash dump if needed ..................................
